Detail produk:
Syarat-syarat pembayaran & pengiriman:
|
Uji tekanan: | 0 ~ 16KPa | Rentang Pengukuran Tekanan Mikro: | 0 ~ 0.1KPa |
---|---|---|---|
Resolusi Nilai Tekanan: | 0.1kPa | Akurasi waktu: | 0,1s |
Media Uji: | Darah sintetis | Volume darah: | 2ml |
Cahaya Tinggi: | mesin uji topeng,peralatan pengujian topeng |
Masker Medis 16KPa Tekanan 2 mL Sintetis Penetrasi Darah Tester
Tinjauan produk:
The medical mask synthetic blood penetration tester is used to measure the jet penetration performance of liquid sources such as synthetic blood to evaluate mask's safety protection performance. Penguji penetrasi darah sintetis buatan masker medis digunakan untuk mengukur kinerja penetrasi jet dari sumber cairan seperti darah sintetis untuk mengevaluasi kinerja perlindungan keselamatan topeng itu. Mainly used to test the permeability of masks to blood, body fluids, blood pathogens (tested with Phi-X174 antibiotics), synthetic blood and other liquids. Terutama digunakan untuk menguji permeabilitas masker terhadap darah, cairan tubuh, patogen darah (diuji dengan antibiotik Phi-X174), darah sintetis dan cairan lainnya. It is suitable for liquid penetration resistance of protective equipment such as masks, gloves, protective clothing, outer cover, coveralls, boots and other protective equipment. Sangat cocok untuk resistensi penetrasi cair dari peralatan pelindung seperti masker, sarung tangan, pakaian pelindung, penutup luar, baju, sepatu bot dan peralatan pelindung lainnya. Peralatan ini dapat menampilkan laporan pengujian dan menyimpan data pengujian.
Metode pengujian:
The medical mask sample is supported on the test device, and 2mL of synthetic blood with a surface tension of 0.042 ± 0.002n / m is sprayed from a cannula with an inner diameter of 0.84mm at a distance of 300mm to the mask under test at a pressure of 16kpa in the horizontal direction. Sampel masker medis didukung pada perangkat uji, dan 2 mL darah sintetis dengan tegangan permukaan 0,042 ± 0,002 n / m disemprotkan dari kanula dengan diameter bagian dalam 0,84 mm pada jarak 300 mm ke masker yang diuji di tekanan 16kpa ke arah horisontal. Simulate the scene of the mask being splashed by blood from the perforated blood vessel. Simulasikan adegan topeng yang terciprat oleh darah dari pembuluh darah berlubang. Take off and visually check the penetration of synthetic blood on the other side of the mask within 10 seconds. Lepas dan periksa secara visual penetrasi darah sintetis di sisi lain topeng dalam waktu 10 detik. Test the medical mask with the corresponding liquid jet pressure of 450cm / s, 550cm / s, 635cm / s, record the test result of each jet velocity, give out the highest blood pressure corresponding to the acceptable quality level limit of 4 for medical masks. Uji masker medis dengan tekanan jet cair 450cm / s, 550cm / s, 635cm / s, catat hasil tes setiap kecepatan jet, berikan tekanan darah tertinggi sesuai dengan batas level kualitas 4 untuk masker medis yang dapat diterima .
Parameter teknik:
Prinsip uji dasar | Simulasikan pernapasan melalui pompa vakum, dan lakukan deteksi perbedaan tekanan | |
Parameter utama | Uji tekanan | 0 ~ 16KPa |
Rentang pengukuran tekanan mikro | 0 ~ 0.1KPa | |
Resolusi nilai tekanan | 0.1kPa | |
Ketepatan waktu | 0,1s | |
Media uji | Darah sintetis | |
Metode kontrol | Manual | |
Volume darah | 2ml | |
Lingkup aplikasi | Masker operasi |
Kontak Person: Ms. Zoe Zou
Tel: +86 13527656435
Faks: 86-020-39185976