rincian produk

Rumah > Produk >

IEC 60065 Hazardous Live Parts Probe Verify The Protection Against Access to hazardous parts

Produk

Peralatan pengujian perangkat medis

Alat Uji Untuk Lab Listrik

Hubungi Kami

Ms. Zoe Zou

sales@sinuotek.com

86-020-39185976

Hubungi Sekarang

IEC 60065 Hazardous Live Parts Probe Verify The Protection Against Access to hazardous parts

MOQ:	1
harga:	Customized
Kemasan Standar:	Kotak aluminium
Periode pengiriman:	3 hari
Cara Pembayaran:	T/t
Kapasitas pasokan:	100 set per bulan

Rincian Informasi

Deskripsi Produk

Informasi detil

Tempat asal

Nama merek

Sinuo

Sertifikasi

Calibration Certificate (Cost Additional)

Nomor model

SN2210-75

Standar Terapan:

IEC 60065

Klausa yang diterapkan:

Klausul 9.1.3

Diameter probe:

Φ4 mm

Tangani panjang:

100mm

Diameter Baffle:

Ф35 ± 0,2 mm

Panjang probe:

100 ± 0,2 mm

Materi probe:

Baja tahan karat

Menangani bahan:

Nilon

Menyoroti:

IEC 60065 hazardous parts probe

hazardous live parts tester

switch life protection tester

Deskripsi Produk

IEC 60065 Hazardous Live Parts Probe Verify The Protection Against Access to hazardous parts

Product information:

Standard:IEC60065:2014 clause 9.1.3, EN61010-1, UL3101-1 and CSA 1010-1, and etc.

Application:This testing probe is used to verify the protection against access to hazardous parts through top openings.

Test sample:Audio, video and similar electronic apparatus.

Feature:It can be used for anti-electric shock test when it is equipped with amphenol connector or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer).

Technical Parameters:

Probe diameter	Ф4+0.05 0 mm
Sphere baffle	SФ35±0.2 mm
Handle diameter	Ф10 mm
Probe length	100±0.2 mm
Handle length	100mm
Standards	IEC60065:2014 clause 9.1.1.3, EN61010-1, UL3101-1 and CSA 1010-1, etc.

Sinuohave a full range of test probes according to different standards, and also can offer customized service.

IEC 60065 Hazardous Live Parts Probe Verify The Protection Against Access to hazardous parts 0

Test procedures and operation

Please refer to the relevant standards.

Take IEC 60950 clause 2.1.1.1 as an example:

This test probe is applied to openings, without appreciable force, in every possible position, except that floor-standing equipment having a mass exceeding 40 kg is not tilted.

The test probe doesn’t have built-in force, if specific applied force required, the test probe should work together with a force gauge. At the end of our probe handle, there is a M6 thread hole to match the force gauge. Showing as following reference picture:

IEC 60065 Hazardous Live Parts Probe Verify The Protection Against Access to hazardous parts 1

IEC 60065 Hazardous Live Parts Probe Verify The Protection Against Access to hazardous parts 2

IEC 60065 Hazardous Live Parts Probe Verify The Protection Against Access to hazardous parts 3

Notice

1. Please do not damage the appliance shape (such as scratching, bending, etc.).

2. Prevented from dust and moisture environment, in order to avoid the oxidation to affect the dimensional accuracy.

3. Be careful of electric shock.

Tag:

beralih daya tahan tester,

beralih mesin uji hidup,

plug socket tester

Produk yang Direkomendasikan