rincian produk

Rumah > Produk >

IEC 60811-1-4 Clause 8.5 Low Temperature Impact Test Apparatus For Cable Iimpact Resistance Test

Produk

Peralatan pengujian perangkat medis

Alat Uji Untuk Lab Listrik

Hubungi Kami

sales@sinuotek.com

+86 13527656435

Hubungi Sekarang

IEC 60811-1-4 Clause 8.5 Low Temperature Impact Test Apparatus For Cable Iimpact Resistance Test

MOQ:	1 Set
harga:	dapat dinegosiasikan
Kemasan Standar:	Kasus Kayu Lapis
Periode pengiriman:	30 hari
Cara Pembayaran:	T/T
Kapasitas pasokan:	20 set per bulan

Informasi detil

Deskripsi Produk

Informasi detil

Tempat asal

Nama merek

Sinuo

Sertifikasi

Calibration Certificate(cost additional )

Nomor model

SN2127

Standar yang berlaku:

IEC60811-1-4

Klausul yang berlaku:

Klausul 8.5

Stasiun Uji:

Tiga Stasiun

ketinggian benturan:

100mm

Bantalan spons-rubber:

Ketebalan 40mm

Bobot yang dikonfigurasi:

Menurut tabel 1 & 2

Modus rilis:

Pelepasan mekanis

Busur ujung bawah:

R300,100 gram

Menyoroti:

IEC 60811-1-4 cable impact tester

low temperature impact test apparatus

cable impact resistance test equipment

Deskripsi Produk

IEC 60811-1-4 Clause 8.5 Low Temperature Impact Test Apparatus For Cable Impact Resistance Test

Product Information:

Standard: IEC60811-506, IEC60811-1-4 clause 8.5, IEC60884-1 and VDE0620, common test methods for insulating and sheathing materials of electric and optical cables-part 1-4: Methods for general application-Test at low temperature.

Application: For assessing the impact resistance of electrical accessories at low temperature, it is also used to assess the impact resistance of wire and cable at low temperature.

Test sample: Electrical accessories, surface mounted installation box, screwed glands, cover cap, polyvinyl chloride insulating and sheathing materials of electric cables etc.

Feature: The apparatus shall be placed on a pad of sponge rubber about 40 mm thick and held in a refrigerator before and during the test.

Technical parameters:

Working station	3 working stations
Weight of the drop hammer g	100,200,300,400,500,600,750,1000,1250,1500 (weight collocation is according to table 1 and table 2)
The height of the drop impact mm	100
Acier steel	Φ20, Bottom end arc: R300,100g
Corresponding standards and applicable scope	IEC60811-1-4, IEC60811-1-14 IEC60811-506
Release mode	Manual, mechanical release

Table 1: For the samples of laying of cable, the weight of the drop hammer required are as follows:

The external diameter of the samples(D/mm)		The weight of the drop hammer /g
＞	＜or ≤	The weight of the drop hammer /g
-	4.0	100
4.0	6.0	200
6.0	9.0	300
9.0	12.5	400
12.5	20.0	500
20.0	30.0	750
30.0	50.0	1000
50.0	75.0	1250
75.0	-	1500

Table 2: For the samples of flexible cable and telecommunication cable, the weight of the drop hammer required is as follows:

The external diameter of the sample D/mm		The weight of drop hammer /g
＞	＜or ≤	The weight of drop hammer /g
For flat flexible cord		100
-	6.0	100
6.0	10.0	200
10.0	15.0	300
15.0	25.0	400
25.0	35.0	500
35.0	-	600

Applications:

Cable Insulation & Sheath Materials – Impact resistance testing at low temperatures
Wire & Cable Manufacturers – Quality control and R&D testing
Testing Laboratories – Standard compliance and certification testing
Research Institutes & Universities – Material durability and performance evaluation

Tag:

beralih daya tahan tester,

beralih mesin uji hidup,

plug socket tester

Produk yang Direkomendasikan

UL 496 Test Probe Pin Baja Keras 1.98mm Pengukur Terminal Dorong 22.5N

Hubungi Sekarang

Alat Uji Tepi Tajam Mainan untuk Kepatuhan Keamanan Mainan EN71-1 Peralatan Pengujian Produk Anak-anak

Hubungi Sekarang

IEC 60884-1 Pasal 24.12 3mm Test Rod untuk pengujian kekuatan penghalang colokan dan aksesibilitas

Hubungi Sekarang

IEC 61386-22 Gambar 101 Alat uji lentur untuk saluran lentur dengan sudut lentur 90°

Hubungi Sekarang

Peralatan Uji Karakteristik Waktu-Arus Pemutus Sirkuit IEC 60898-1 Klausul 9.10.1

Hubungi Sekarang

IEC 61386-21 Alat Uji Pembengkokan untuk Konduit Kaku, Non-Logam & Komposit

Hubungi Sekarang

IEC 61386-1 Gambar 8 Alat Uji Ketahanan Panas untuk Konduit dan Pipa Bergelombang

Hubungi Sekarang

rincian produk

Produk

Alat Uji Peralatan Listrik

Laboratorium Efisiensi Energi

Peralatan Pengujian Kendaraan

Baterai Peralatan Pengujian

Ganti Penguji Kehidupan

LED Testing Equipment

Alat Uji Kualitas Air

Uji lingkungan Chamber

Ruang Uji Mudah Terbakar

Mesin Uji MCB

Peralatan pengujian perangkat medis

Peralatan Uji IEC 62368

Alat Uji Untuk Lab Listrik

IEC 60811-1-4 Clause 8.5 Low Temperature Impact Test Apparatus For Cable Iimpact Resistance Test

MOQ:	1 Set
harga:	dapat dinegosiasikan
Kemasan Standar:	Kasus Kayu Lapis
Periode pengiriman:	30 hari
Cara Pembayaran:	T/T
Kapasitas pasokan:	20 set per bulan

Informasi detil

Deskripsi Produk

Informasi detil

Tempat asal

Cina

Nama merek

Sinuo

Sertifikasi

Calibration Certificate(cost additional )

Nomor model

SN2127

Standar yang berlaku:

IEC60811-1-4

Klausul yang berlaku:

Klausul 8.5

Stasiun Uji:

Tiga Stasiun

ketinggian benturan:

100mm

Bantalan spons-rubber:

Ketebalan 40mm

Bobot yang dikonfigurasi:

Menurut tabel 1 & 2

Modus rilis:

Pelepasan mekanis

Busur ujung bawah:

R300,100 gram

Kuantitas min Order:

1 Set

Harga:

dapat dinegosiasikan

Kemasan rincian:

Kasus Kayu Lapis

Waktu pengiriman:

30 hari

Syarat-syarat pembayaran:

T/T

Menyediakan kemampuan:

20 set per bulan

Menyoroti

IEC 60811-1-4 cable impact tester

low temperature impact test apparatus

cable impact resistance test equipment

Deskripsi Produk

IEC 60811-1-4 Clause 8.5 Low Temperature Impact Test Apparatus For Cable Impact Resistance Test

Product Information:

Application: For assessing the impact resistance of electrical accessories at low temperature, it is also used to assess the impact resistance of wire and cable at low temperature.

Test sample: Electrical accessories, surface mounted installation box, screwed glands, cover cap, polyvinyl chloride insulating and sheathing materials of electric cables etc.

Feature: The apparatus shall be placed on a pad of sponge rubber about 40 mm thick and held in a refrigerator before and during the test.

Technical parameters:

Working station	3 working stations
Weight of the drop hammer g	100,200,300,400,500,600,750,1000,1250,1500 (weight collocation is according to table 1 and table 2)
The height of the drop impact mm	100
Acier steel	Φ20, Bottom end arc: R300,100g
Corresponding standards and applicable scope	IEC60811-1-4, IEC60811-1-14 IEC60811-506
Release mode	Manual, mechanical release

Table 1: For the samples of laying of cable, the weight of the drop hammer required are as follows:

The external diameter of the samples(D/mm)		The weight of the drop hammer /g
＞	＜or ≤	The weight of the drop hammer /g
-	4.0	100
4.0	6.0	200
6.0	9.0	300
9.0	12.5	400
12.5	20.0	500
20.0	30.0	750
30.0	50.0	1000
50.0	75.0	1250
75.0	-	1500

Table 2: For the samples of flexible cable and telecommunication cable, the weight of the drop hammer required is as follows:

The external diameter of the sample D/mm		The weight of drop hammer /g
＞	＜or ≤	The weight of drop hammer /g
For flat flexible cord		100
-	6.0	100
6.0	10.0	200
10.0	15.0	300
15.0	25.0	400
25.0	35.0	500
35.0	-	600

Applications:

Cable Insulation & Sheath Materials – Impact resistance testing at low temperatures
Wire & Cable Manufacturers – Quality control and R&D testing
Testing Laboratories – Standard compliance and certification testing
Research Institutes & Universities – Material durability and performance evaluation

Tag: