rincian produk

Rumah > Produk >

EN 60350-2 Standardized Cookware Lid With Temperature Sensor fixture test pot for induction cookers

Produk

Peralatan pengujian perangkat medis

Alat Uji Untuk Lab Listrik

Hubungi Kami

Ms. Zoe Zou

sales@sinuotek.com

86-020-39185976

Hubungi Sekarang

EN 60350-2 Standardized Cookware Lid With Temperature Sensor fixture test pot for induction cookers

MOQ:	1
harga:	dapat dinegosiasikan
Kemasan Standar:	KARTON
Periode pengiriman:	20 hari
Cara Pembayaran:	T/t
Kapasitas pasokan:	20 set per bulan

Rincian Informasi

Deskripsi Produk

Informasi detil

Tempat asal

Nama merek

Sinuo

Sertifikasi

Calibration certificate(cost additional)

Nomor model

SN1115C

Bahan Bawah:

baja tahan karat 1,4016

Bahan dinding:

1.4301 baja tahan karat

Ukuran ketebalan bawah:

6 mm ± 0,05 mm

Ketebalan dinding:

1 mm ± 0,05 mm

Bahan tutup:

Terbuat dari aluminium

Ketebalan tutup:

2 mm ± 0,05 mm

Sensor suhu:

Di tengah

Bahan Perlengkapan:

Terbuat dari plastik

Deskripsi Produk

EN 60350-2 Standardized Cookware Lid With Temperature Sensor Fixture Test Pot for Induction Cookers

Application:

The Standardised Cookware (Stainless Steel Pans) according to EN 60350-2:2018 requirements, mainly used to assess the energy efficiency of electromagnetic cooker test cookware.

Technical Parameters:

a) The Standardised Cookware bottom material is made of 1.4016 stainless steel, bottom thickness size is 6 mm ± 0.05 mm, bottom cannot be protrude outwards.

b) The Standardised Cookware walls material is made of 1.4301 stainless steel, walls thickness is 1 mm ± 0.05 mm, It does not have a handle and a protruding cylinder.

c) The Standardised Cookware lid material is made of aluminum, lid thickness is 2 mm ± 0.05 mm, diameter of each hole in the lid is 16 mm ± 0.1 mm, and holes are evenly distributed on the hole ring.

d) A fixture with a temperature sensor at the center of the lid, its material is plastic.

Diameter of the cookware bottom (outside) mm	Diameter of the lid mm	Lid hole circle diameter mm	Number of holes on the circle	Total cookware height (outside) mm	Flatness of cookware bottom mm	Water load g	Cooking zone size category mm	Standardised cookware categories
120 ± 0,5	130 ± 1	80 ± 1	7	125 ± 0,5	≥ 0 < 0,075	650	≥ 100 < 130	A
150 ± 0,5	165 ± 1	110 ± 1	11	125 ± 0,5	≥ 0 < 0,075	1030	≥ 130 < 160	A
180 ± 0,5	200 ± 1	140 ± 1	16	125 ± 0,5	≥ 0 < 0,075	1500	≥ 160 < 190	B
210 ± 0,5	230 ± 1	170 ± 1	22	125 ± 0,5	≥ 0 < 0,1	2050	≥ 190 < 220	C
240 ± 0,5	265 ± 1	200 ± 1	29	125 ± 0,5	≥ 0 < 0,1	2700	≥ 220 < 250	C
270 ± 0,5	300 ± 1	230/210 a ± 1	18/18 a	125 ± 0,5	≥ 0 < 0,15	3420	≥ 250 < 280	D
300 ± 0,5	330 ± 1	260/210 a ± 1	23/22 a	125 ± 0,5	≥ 0 < 0,15	4240	≥ 280 < 310
330 ± 0,5	365 ± 1	290/270 a ± 1	27/27 a	125 ± 0,5	≥ 0 < 0,15	5140	≥ 310 ≤ 330
a Number of holes are arranged on two hole circles.

Note: 1. The actual thickness of the pot lid is 2mm ± 0.1mm (this dimension is the actual thickness of the national standard raw material).
2. The flatness of the bottom of the pot may not be within the standard requirements (we will first make the bottom according to the standard requirements, but the bottom and the wall will be deformed during welding, so we can only control it within >0<0.5)

alat uji hipot ac,

alat uji kawat pijar,

alat uji instalasi listrik

Produk yang Direkomendasikan

Intelligent Luminaires Thermal Aging Rack with 64-Channel Temperature Monitoring

Hubungi Sekarang

Regenerative High-Precision Battery Test System For Li-ion Performance Analysis

Hubungi Sekarang

High Low Temperature Low Pressure Test Chamber -40°C to +70°C 5kPa

Hubungi Sekarang

6 M³ Walk-in Sand & Dust Test Chamber IP Dust Protection Testing

Hubungi Sekarang

Programmable AC Constant Current Source 5V 300A SPWM constant current tester

Hubungi Sekarang

Penguji Dampak Pendulum Energi Tinggi IK07-IK11 Untuk Keselamatan Listrik

Hubungi Sekarang

Video

Penguji Kekuatan Dampak Lanjutan untuk Mesin Cuci Bukaan Atas

Hubungi Sekarang

rincian produk

Produk

Alat Uji Peralatan Listrik

Laboratorium Efisiensi Energi

Peralatan Pengujian Kendaraan

Baterai Peralatan Pengujian

Ganti Penguji Kehidupan

LED Testing Equipment

Alat Uji Kualitas Air

Uji lingkungan Chamber

Ruang Uji Mudah Terbakar

Mesin Uji MCB

Peralatan pengujian perangkat medis

Peralatan Uji IEC 62368

Alat Uji Untuk Lab Listrik

EN 60350-2 Standardized Cookware Lid With Temperature Sensor fixture test pot for induction cookers

MOQ:	1
harga:	dapat dinegosiasikan
Kemasan Standar:	KARTON
Periode pengiriman:	20 hari
Cara Pembayaran:	T/t
Kapasitas pasokan:	20 set per bulan

Informasi detil

Deskripsi Produk

Informasi detil

Tempat asal

CINA

Nama merek

Sinuo

Sertifikasi

Calibration certificate(cost additional)

Nomor model

SN1115C

Bahan Bawah:

baja tahan karat 1,4016

Bahan dinding:

1.4301 baja tahan karat

Ukuran ketebalan bawah:

6 mm ± 0,05 mm

Ketebalan dinding:

1 mm ± 0,05 mm

Bahan tutup:

Terbuat dari aluminium

Ketebalan tutup:

2 mm ± 0,05 mm

Sensor suhu:

Di tengah

Bahan Perlengkapan:

Terbuat dari plastik

Kuantitas min Order:

Harga:

dapat dinegosiasikan

Kemasan rincian:

KARTON

Waktu pengiriman:

20 hari

Syarat-syarat pembayaran:

T/t

Menyediakan kemampuan:

20 set per bulan

Deskripsi Produk

EN 60350-2 Standardized Cookware Lid With Temperature Sensor Fixture Test Pot for Induction Cookers

Application:

The Standardised Cookware (Stainless Steel Pans) according to EN 60350-2:2018 requirements, mainly used to assess the energy efficiency of electromagnetic cooker test cookware.

Technical Parameters:

a) The Standardised Cookware bottom material is made of 1.4016 stainless steel, bottom thickness size is 6 mm ± 0.05 mm, bottom cannot be protrude outwards.

b) The Standardised Cookware walls material is made of 1.4301 stainless steel, walls thickness is 1 mm ± 0.05 mm, It does not have a handle and a protruding cylinder.

d) A fixture with a temperature sensor at the center of the lid, its material is plastic.

Diameter of the cookware bottom (outside) mm	Diameter of the lid mm	Lid hole circle diameter mm	Number of holes on the circle	Total cookware height (outside) mm	Flatness of cookware bottom mm	Water load g	Cooking zone size category mm	Standardised cookware categories
120 ± 0,5	130 ± 1	80 ± 1	7	125 ± 0,5	≥ 0 < 0,075	650	≥ 100 < 130	A
150 ± 0,5	165 ± 1	110 ± 1	11	125 ± 0,5	≥ 0 < 0,075	1030	≥ 130 < 160	A
180 ± 0,5	200 ± 1	140 ± 1	16	125 ± 0,5	≥ 0 < 0,075	1500	≥ 160 < 190	B
210 ± 0,5	230 ± 1	170 ± 1	22	125 ± 0,5	≥ 0 < 0,1	2050	≥ 190 < 220	C
240 ± 0,5	265 ± 1	200 ± 1	29	125 ± 0,5	≥ 0 < 0,1	2700	≥ 220 < 250	C
270 ± 0,5	300 ± 1	230/210 a ± 1	18/18 a	125 ± 0,5	≥ 0 < 0,15	3420	≥ 250 < 280	D
300 ± 0,5	330 ± 1	260/210 a ± 1	23/22 a	125 ± 0,5	≥ 0 < 0,15	4240	≥ 280 < 310
330 ± 0,5	365 ± 1	290/270 a ± 1	27/27 a	125 ± 0,5	≥ 0 < 0,15	5140	≥ 310 ≤ 330
a Number of holes are arranged on two hole circles.

Tag: